Deluxe Building Products > Lath & Plaster Products > Deluxe #15 Double V Control Joint


Deluxe #15 Double V Control Joint
  • Available in Galvanized Steel 26ga
The Deluxe #15 Double V Control joints are used to relieve stresses in large plaster walls and ceilings. This inconspicuous profile provides stress relief and finishing point for the top color coat. This product has expanded flanges on both sides for proper keying of the scratch and brown coat.
Deluxe #15 Double V Control Joint Data Sheet
Quote Request Form

MATERIALS AND FINISHES
Galvanized Steel

ASTM & CODE STANDARDS
All Accessories are fabricated from prime galvanized steel G60 (G90 upon request) zinc coating by the hot dipped method, conforming to steel and coating specification ASTM A-653/A-653M or zinc alloy meeting ASTM B-69.

ADDITIONAL INFORMATION
Please note not all combinations of sizes and materials may be available in stock.
Not all X Sizes (Depth), Y Sizes (Reveal) and material combinations may be possible.
Ventilation Guide
Proper Measurement: Ground and Point-To-Point


In Use

Dimensions

Installation

Note: This Installation Guide is supplied solely to assist in the selection and application of product manufactured by Deluxe Building Products. This drawing is generic in nature and should not be used in design or construction without an independent evaluation by a qualified Architect or Engineer of Record.


Available Deluxe #15 Double V Control Joint Sizes Options
X Sizes
3/8", 1/2", 3/4" or 7/8"
Length
120"


©2018-2025 Deluxe Building Products. All Rights Reserved Worldwide. Go To Top
CALIFORNIA RESIDENTS: Please review Prop 65 by visiting www.P65Warnings.ca.gov.