Deluxe Building Products > Lath & Plaster Products > Deluxe Diamond Lath V Groove


Deluxe Diamond Lath V Groove
  • Custom Sizes Available!
    The Deluxe Diamond Lath V Groove is made with five V Grooves in the lath instead of dimples. These V Grooves provide the necessary 1/4" furring off the sheathing’s surface to allow for proper embedment and keying of the scratch coat on all types of walls.
    Deluxe Diamond Lath V Groove Data Sheet
    Quote Request Form

    MATERIALS AND FINISHES
    Galvanized Steel

    ASTM & CODE STANDARDS
    All Accessories are fabricated from prime galvanized steel G60 (G90 upon request) zinc coating by the hot dipped method, conforming to steel and coating specification ASTM A-653/A-653M or zinc alloy meeting ASTM B-69.

    ADDITIONAL INFORMATION
    Please note not all combinations of sizes and materials may be available in stock.
    Not all X Sizes (Depth), Y Sizes (Reveal) and material combinations may be possible.
    Ventilation Guide
    Proper Measurement: Ground and Point-To-Point


    • In Use

    Dimensions

    Installation

    Note: This Installation Guide is supplied solely to assist in the selection and application of product manufactured by Deluxe Building Products. This drawing is generic in nature and should not be used in design or construction without an independent evaluation by a qualified Architect or Engineer of Record.


    Available Deluxe Diamond Lath V Groove Sizes Options
    Weight
    2.5 LB or 3.4 LB
    Dimensions
    27" x 97"



    ©2018-2026 Deluxe Building Products. All Rights Reserved Worldwide. Go To Top
    CALIFORNIA RESIDENTS: Please review Prop 65 by visiting www.P65Warnings.ca.gov.